Zte ZXR10 2900E series Configuration Manual page 145

Command
show dhcp ip-source-guard (all configuration modes)
show dhcp option82 (all configuration modes)
show dhcp option82 port (all configuration modes)
show dhcp option82 device (all configuration modes)
zte(cfg)#
zte(cfg)#
show dhcp client (all configuration modes)
zte(cfg-router)#
zte(cfg-router)#
renew}
zte(cfg-router)#
{characters <string>| hex-numbers <hex-string>}| client-id mac |
hostname <string>| lease {<0-365><0-23><0-59>| infinite}}
zte(cfg-router)#
{dns-server | domain-name | route | static-route | tftp-server-name}
zte(cfg-router)#
zte(cfg-router)#
<A.B.C.D>
SJ-20130731155059-002|2013-11-27 (R1.0)
set dhcp client {enable | disable}
set dhcp client broadcast-flag {enable | disable}
set ipport <0-63> ipaddress dhcp
set ipport <0-63> ipaddress dhcp {release |
set ipport <0-63> dhcp client {class-id
set ipport <0-63> dhcp client request
set ipport <0-63> dhcp relay agent
set ipport <0-63> dhcp relay server
Chapter 5 Service Configuration
5-97
ZTE Proprietary and Confidential
Function
Displays port ip-source-guard
configuration.
Displays DHCP option82
configuration information.
Displays the configuration
information of DHCP option82.
Displays the configuration
information of the device.
Enables or disables the DHCP
client function.
Sets whether the packet that
DHCP server returns is a
broadcast packet.
Displays DHCP client configuration
information.
Sets the IP address of layer-3
interface acquired by DHCP
protocol.
Releases or renews layer-3
interface IP address.
Sets available messages when
the DHCP client interacts with the
server.
Sets message type sent by the
server when the DHCP client
interacts with the server.
Sets a layer-3 IP port as a DHCP
relay agent. If the port is an inside
port, the address of the port is
used as the source addresses of
DHCP packets sent to the server.
Sets the address of the DHCP
relay server onthe IP port. When
DHCP packets are forwarded to a
server, this server is preferred.