Figure 6-24 Single Port Configuration Page - Zte ZXR10 2900E series Configuration Manual

ZXR10 2900E Series Configuration Guide

Figure 6-24 Single Port Configuration Page

Configure the attribute of the selected port on this page. After configuration, click the
Apply button to complete the configuration.
Note:
"Security" and "MacLimit" are conflicting. The two attributes cannot be set to be
enabled at the same time.
Caution!
If the port connected to the network management computer is disabled, the network
management is interrupted.
Bulk port configuration
Select multiple ports on the port configuration information page (select Select All to
select all ports), and then click Apply. The bulk port configuration page is displayed,
see Figure 6-25.
6-34
SJ-20130731155059-002|2013-11-27 (R1.0) ZTE Proprietary and Confidential