Zte ZXR10 2900E series Configuration Manual page 69

Command
zte(cfg)#
zte(cfg)#
<1-1024>{vlan <vlanlist>| port <portlist>[replace]
zte(cfg)#
zte(cfg)#
zte(cfg)#
<A.B.C.D>[port <portlist>| trunk <trunklist>]
zte(cfg)#
{port <portlist>| trunk <trunklist>}
zte(cfg)#
disable}
zte(cfg)#
zte(cfg)#
zte(cfg)#
zte(cfg)#
zte(cfg)#
disable}
zte(cfg)#
zte(cfg)#
SJ-20130731155059-002|2013-11-27 (R1.0)
set igmp snooping {add | delete} vlan <vlanlist>
set igmp snooping {add | delete} maxnum
set igmp snooping delete host
set igmp snooping monitor-ring {enable | disable}
set igmp snooping vlan <1-4094>{add | delete} group
set igmp snooping vlan <1-4094>{add | delete} smr
set igmp snooping private-group {<A.B.C.D>| enable |
set igmp snooping timeout {host | router}<time>
set igmp snooping query-interval <10-2147483647>
set igmp snooping response-interval <10-250>
set igmp snooping last-member-query <10-250>
set igmp snooping query vlan <vlanlist>{enable |
set igmp snooping query version {v2 | v3}
set igmp snooping fastleave {enable | disable}
Chapter 5 Service Configuration
5-21
ZTE Proprietary and Confidential
Function
Adds or deletes the IGMP
Snooping function to/from the
specified VLAN.
Sets or clears the maximum
multicast group number on the
specified VLAN/port. The replace
keyword means to replace the
query group which does not
respond for the longest period.
Deletes all dynamic multicast
users.
Enables or disables the IGMP ring
monitoring function.
Adds or deletes static multicast
group based on the VLAN.
Adds or deletes routing port or
trunk on the specified VLAN.
Adds private multicast group
and enables or disables private
multicast group function.
Sets multicast member or route
time-out.
The value of the <time> parameter
is 0 means no aging. A value
between 100 and 2147483647
(unit: 100 milliseconds).
Sets the snooping interval, unit:
100 milliseconds.
Sets the snooping response
interval, unit: 100 milliseconds.
Sets the snooping interval for
the last member, unit: 100
milliseconds.
Enables or disables the query
function on the specified VLAN.
Sets the IGMP version of the query
packet sent by the switch.
Enables or disables the fast leave
function.