Software Architecture; Overview; Figure 24 The Panel Of 1-Port 10Ge Electrical Interface Board; The Attributes Of 10Ge Interface Board - Zte ZXR10 5900 Product Description

ZXR10 5900 5200 Product Description

Figure 24 The panel of 1-port 10GE electrical interface board

The optical module used by 1-port 10GE optical interface board is the plug-in XFP
optical module. Table 5 shows all its attributes:
Table 5

The attributes of 10GE interface board

Port Type
CX4
XFP(XFP-S10K)
There are two indicators on the panel of 1-port GE interface board, and Table 6 shows
their features respectively.
Table 6 The functions of the indicators on the panel of 1-port 10GE interface board
Indicator
LINK
ACT
4.3

Software Architecture

4.3.1

Overview

ZXR10 59/52 series switches are multi-layer switches with provide L2 switching and L3
routing capabilities and support multiple functions, providing L2/3 wire-speed switching
and routing with QoS assurance. The operating system software performs system
management, control, and data forwarding. Its basic operations include system start,
configuration management, running of routing protocols, maintenance of various tables,
switch chipset configurations and status control, as well as software forwarding of
certain exceptional packets. The system software is required to support the following
functions:
48
Attributes
CX4 electrical interface, transmission distance: 2m
1310nm, XFP packaged , SC, SMF, DFB laser, maximum
transmission distance 10km
Features
On, link of this interface has been established,
Off, this interface does not link to any other interfaces.
Off, no data is under transmission
Flashing, data transmission
© 2010 ZTE Corporation. All rights reserved. ZTE Confidential Proprietary