Install Additional Language Software (If Needed) - Avaya INTUITY AUDIX LX Installation Printable Manual

Hide thumbs Also See for INTUITY AUDIX LX:
Table of Contents

Advertisement

Installation Printable Guide for the INTUITY AUDIX LX

Install Additional Language Software (if needed)

The language packages, also called announcement sets, allow system users to hear voice prompts
and system announcements in other languages. The system is shipped from the factory with the
following language packages installed:
US English
l
English TDD (for teletype (TTY) machines)
l
Adding language software causes the voice system to stop. Plan to do the installation during low
usage hours.
Use the INTUITY AUDIX LX Languages CD to install additional announcement sets:
1. Log on as craft (for a new installation) or sa (if restoring a system). The sa default password
is sapasswd.
2. From the web-based Administration Main Menu, select:
Utilities
Software Management
Software Installation
3. Follow the on-screen instructions to insert the CD.
4. Click CD (or another installation media if applicable).
5. The system warns you that system data should be backed up. If necessary perform a system
backup. If the system is new, no data needs to be backed up.
6. Click Continue Operation.
The system displays a list of packages available on the CD, either software packages or
additional language sets depending on which CD you have inserted. Packages that have
already been installed are marked with "=".
7. Select the language packages you want to install.
8. Press PageDown to see the bottom of the page, then click Install selected packages.
The system displays a list of packages to be installed.
9. Review the list, then click Proceed with installation .
The system begins the installation and displays installation status messages. The installation
is complete when the pointer changes from a wristwatch to an X.
10. After the software is installed, press PageDown to see the bottom of the status page.
11. If all software was installed successfully, remove the CD from the CD drive.
12. Click Restart the System.
13. After the system restarts, press Enter to return to the prompt, and log in.
14. From the web-based Administration Main Menu, select:
Utilities
Software Management
Start Messaging System
file://C:\Avaya_INTUITY_AUDIX_LX\installprint.htm
Page 17 of 42
3/20/2002

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents