Upgrade Software On The Lsps (If Used) - Avaya S8500 Upgrading Software And Firmware

Upgrading Communication Manager—R2.0 to R2.X
Post-Upgrade steps:
•
Enable scheduled maintenance
•
Verify Survivable Remote PNs
•
Busy out trunks
•
Check for translation corruption
•
Resolve alarms
•
Back up files on the media server
•
Release alarm suppression (optional)
•
Start call processing on the LSPs (if used)
•
Register Communication Manager
•
Log off the administration applications

Upgrade software on the LSPs (if used)

If the S8500 Media Server is the primary controller for a G350 or G700 Media Gateway equipped with a
local survivable processor (LSP), you must upgrade the software on the LSPs (S8300s) before you
upgrade the software on the S8500 Media Servers. For more detailed information on the software
upgrade process, refer to Installation and Upgrades for the Avaya G700 Media Gateway and Avaya
S8300 Media Server (555-234-100).
20
on page 35
on page 35
on page 36
on page 36
on page 37
NOTE:
Although the LSPs remain registered with the primary media server, the LSPs will not
accept translations if they are running an older version of the software than the primary
media server.
Upgrading Software and Firmware—S8500 Configuration
on page 37
on page 37
on page 37
on page 38
on page 38
December 2003