Set Locations (If Necessary); Set Core Dump Vector (H/C Only) - Avaya DEFINITY Server R Manual

Upgrades and additions

Hide thumbs Also See for DEFINITY Server R:

Table of Contents

Set Locations (if necessary)

After you set the daylight savings rules, you must set the locations for all switches.

It is possible to have switches in different time zones.

1. Type change locations and press

ARS Prefix 1 Required for 10-Digit NANP Calls? _

Main________________

____________________

2. Type y in the ARS Prefix 1 Required for 10-Digit NANP

Calls? field.

3. Type the information in the various fields for each switch.

1. Type set vector f spe-maint and press

This command enables the system to perform a core dump in the event of

any system restart. The core dump can be used as a diagnostic tool to help

determine the cause of the restart.

Use the name of the switch or "Local Switch" in the Name field for the

first location.

to save the changes.

Daylight-Savings

Issue 5 October 2002

Table of Contents