3. Set the IP Control field to y.
4. Verify that all the other fields are populated.
5. Press Enter to save translations.
6. Repeat steps 1 through 5 for each port network.
Setting alarm activation level
1. Type change system-parameters maintenance and press Enter.
2. In the CPE Alarm Activation Level field, select none, warning, minor, or major,
according to customer request, and press Enter.
3. Repeat for each IPSI.
Saving translations
Type save translation and press Enter to save the translations to the hard drive.
Installing and Configuring the Avaya S8500 Media Server
Setting alarm activation level
February 2006
61