If The Server Is A Lsp; Stop And Start Communication Manager - Avaya S8510 Manual

Job Aid: Replacing the Avaya S8510 server
2. Type sampdiag -v and press Enter.
3. Ensure that the output looks like the following (See Note).
Note:
The SAMP HWaddress, shown in the example with "X"s, is unique to each
Note:
SAMP.
login@servername> sampdiag -v
The SAMP is using the Avaya IP address.
SAMP HWaddress: XX:XX:XX:XX:XX:XX
SAMP IPaddress: 192.11.13.2
HOST IPaddress: 192.11.13.1
SSH port: 10022
SSH OK
HPI OK
SAMP OK

If the server is a LSP

The procedures in this section are for S8510 servers that function as a Local Survivable
Processor (LSP). If the S8510 is not a LSP, omit this section and continue with
replacement tasks

Stop and start Communication Manager

This synchronizes the main server's Communication Manager license for the LSP:
1. At the server command line type stop -caf and press Enter to stop the LSP/ESS
2. At the server command line type start -ca and press Enter to start the LSP/ESS
30 Job Aids for Field Replacements (FRUs) for the Avaya S8510 Server
on page 31.
Final