Configure Network Parameters - Avaya S8510 Manual

Job Aid: Replacing the Avaya S8510 server
3. Wait until the system displays the message, "...unpacked successfully," and click Continue.
The Manage Updates page displays.
4. If the update that you want to activate shows unpacked in the Status column, select the file
(radio button) and click Activate.
The status of the activation process displays on the screen. If a reboot is required, the
system automatically reboots.
5. Click on Yes.
Wait until the system displays the Continue button.
6. Click Continue.

Configure network parameters

If you backed up the server data to a Local PC Card / Compact Flash card, omit this section and
continue with Verify connectivity to the backup files
section.
Note:
You must have the host name, subnet mask, and IP addresses of the server and
Note:
default gateway to complete this procedure.
To configure the network parameters on the server:
1. At the Maintenance Web Pages select Server Configuration > Configure Server.
The Configure Server wizard launches.
2. Click Continue until you get to the "Specify how you want to use this wizard" screen.
3. Select Configure individual services and click Continue.
4. Click Set Identities from the "Configure Individual IP Services" list on the left.
The Set Identities page displays.
5. Fill in the host name with the name of the server.
6. Click Continue.
The Configure Interfaces page displays.
7. Fill in the correct server and gateway IP addresses and the subnet mask.
8. Click Change to update the system files.
Note:
If an Action Cancelled message appears before the Success message, refresh
Note:
the screen and click Change again.
24 Job Aids for Field Replacements (FRUs) for the Avaya S8510 Server
on page 25. Otherwise, complete this entire