Configure The Network Parameters - Avaya S8500 Manual

3 Migrating from an S8700 Media Server to an S8710 Media Server
On first S8710 Media Server

Configure the network parameters

1
Under Server Configuration, click Configure Server to open the first page (Select server type) of
the Configure Server process.
2
Select the appropriate server type and click Continue.
3
Click Continue through the Review Notices to get to the Specify how you want to use this wizard
page.
4
Select Configure individual services and the correct server number and click Continue.
5
Select Configure Interfaces from the menu on the left.
6
Fill in the correct IP addresses, Gateway, and Subnet mask (or use the default addresses) for the
Ethernet port and select AUTOSENSE for the speed.
•
•
Click Change to update and reboot the media server. When the screen displays
Successfully configured ethernet interfaces.
the Ethernet ports are configured.
7
Click Close Window to close the Configure Server wizard.
154
NOTE:
You must readminister the Ethernet port connecting to the customer's network. You must
have the host name, IP address, subnet mask and default gateway for the two media
servers and the active server as well as the IP address for the Ethernet port connecting to
the customer's network.
<_SysID>S8710 IP: Eth 0
<_SysID>S8710 MC: Eth 4
Migrating to the Avaya S8700 or S8710 Media Server
June 2004