Acura 1994 Integra Service Manual page 958

Hide thumbs Also See for 1994 Integra:

Table of Contents

Opening Drag Check

(Motor Removed)

Before installing the motor. measure the effort required

to open the glass using a spring scale as shown

CAUTION: Whon using a spring scalo. protoct the

l€ading odge ol the glass with a shop tow€I.

lf load is over 40 N (4 kgl, 9lbt), check side clearance

and glass height adiustment (see page 20-85)'

Closing Force Check

lMotor Installed)

1. After installing all removed parts, have a helper hold

the switch to close the glass while you measure

force required to stop it. Attach a spring scale as

shown. Read the torce as soon as the glass stops

moving, then immediately release the switch and

spring scale.

CAUTION: When using a sp ng scala. protect th€

leading odge ol the glass with a shop towel'

Closing Force: 200-290 N

120-30 ksf. 44-66 lbf)

lf the lorce is not within specification, install a new

lock washer. adjust the tension by turnang the mo-

tor clutch adjusting nut, and bend the lock washe.

against the motor clutch adjusting nut.

clocKwlsE /i

To increase \ l,

Show Quick Links

Chapters

Table of Contents

Integra 1994