Transmission Housing; Removal - Acura 1994 Integra Service Manual

Transmission Housing
Removal
NOTE:
. l f t h e t r a n s m i s s i o n h o u s i n g o r c l u t c h h o u s i n g a . e
r e p l a c e d , t h e b e a r i n g p r o l o a d m u s t b e a d j u s t e d
( 8 1 8 C 1 e n g i n e ) .
.
Place the clutch housing on two pieces of wood thick
enough to keep the mainshaft from the hitting the
workbench.
1. Remove the back-up light switch.
2. Remove the transmission hanger B,
3. Remove the set screws, the springs, and the steel
balls.
Tna sMtsstoN
SPBING
L. 30 mm
11.2 inl
SET SCBEW
WASHER
Replace.
4. Remov€ the reverse idler gear shaft bolt,
WASHER
Replace.
REVERSE
L
1 3 - 1 0
ATTACHING BOLT
5. Loosen the transmission housing attaching bolts in
a crisscross pattern in several steps. then remove
them.
TRANSMISSION
Remove the 32 mm sealing bolt.
Expand the snap ring on ths countershaft ball bear-
ing and remove it from the groove using a pair of
snap ring pliers.
32 mm SEALING BOLT
7 .
SNAP RING