Acura 1994 Integra Service Manual page 988

Rear Seat Belt Replacement (cont'd)
a Rear seat {see page 20-1 10)
a Trunk mat (see page 20-97}
a Rear pillar trim panel (see page 20-951 a Rear trim panel {see page 20-971
a Rear shelf trim panel (see page 20-95)
. Trunk side panel (see page 20-97)
. Rear shelf (see pag€ 20-96)
Remove all the anchor bolts, the retractor bolt and the retractor mounting bolts, then remove the rear s€at belts
and center belts.
NOTE: When removing the anchor bolts and the retractor bolt, use a 17 mm socket or box-end wrench.
Check thst the retractor locking m€chanism tunctions as described on page 2O-122'
UPPER ANCHOR BOLT
7/16-20 UNF
32 N.tn (3.3 kgf'm, 24 lbl ft)
RETRACTOR MOUNTING
BOLT
6 x 1 . 0 m m
9.8 il.m (1.0 kgt.m,
7.2 tbt.tll
RETRACTOR BOLT
7/16-20 UNF
32 .m (3.3 kgl.m,
24 tbt.ft)
RETRACTOR REAR SEAT
BELT
Seat Belts
Sodan
'I . Remove:
20-120
CENTER AI{CHOR BOLTS
7/16-20 UNF
32 N.m (3.3 ksl'm,
LOWER ANCHOR BOLT
7/16-20 UNF
32 N.m (3.3 kgf .m,
24 tbf.ftl
24 lbl ftl
CENTER BELTS