Acura 1994 Integra Service Manual page 943

9. With a sponge. apply a light coat of glass primer to
the inside face ot the quarter glass, as shown, then
lightly wipe it ott with gauze or cheesecloth.
N O T E :
a Do not apply body primer to the quaner glass, and
do not get body and glass primer sponges mixed
u p .
a Never touch the primed surlaces with your hands.
lf you do, the adhesive may not bond to the quan-
er glass properly, causing a leak after the quarter
glass is installed.
a Keep water, dust. and abrasive materials awav
from the primed surface.
V///
, AooV glass primer h6re-
10 mm lO.4 inl
10 mm lO,4 inl
1O. Install the quarter trim.
1 1. With a sponge. apply a light coat of body primer to
the original adhesive remaining around the quarte.
glass opening flange.
Let the body primer dry lor at least 1O minutes.
N O T E :
a Do not apply glass primer to the body, and be
careful no1 to mix up glass and body prime.
sponges.
a Never touch the primed surfaces with your hands.
'////7, , aepty body p.imer here.
lO.2 inl
5 m m
ffi
1 6 m m
{0.63 in}
'16
mm
(0.63 inl
6 m m
10.24 in)
OUARTER
TRIM
(cont'd )
OUARTER
5 mrr| 10.2 inl
20-75