Acura 1994 Integra Service Manual page 421

Description
Hydraulic Flow (cont'd)
L1l Position
The line pressure {1) becomes line pressure (4) at the manual valve and passes to the lst clutch and 1st accumulator.
Then line pressure (41 flows through the 1st-hold clutch and lst-hold accumulator.
Fluid flows by way of:
- Line Pressure {4} - 1-2 Shitt Valve * 2-3 Shitt Valve - 3rd Clutch Pressure {31) - 3-4 Shift Valve - 4th Clutch
Pressure (41) - Manual Valve -
lst-hold Clutch Pressure {15) -
1st-hold Clutch
The modulator pressure (6) is supplied to the 1-2 and 2-3 shift valves.
The line pressure (1) also flows to throttle valve B.
NOTE:
. When used. "left" or "right" indicates direction on the flowchart.
. SOL-@: Shift Control Solenoid Valve A
. SOL@: Shift Control Solenoid Valve B
. SOL-@: Lock-up Control Solenoid Valve A
. SOL-@: Lock-up Control Solenoid Valve B
14-30