Acura 1994 Integra Service Manual page 957

10. Separate the glass bracket, lifter, slide stopper lank
and slider.
GLASS
LIFTER
BRACKET
SLIDER
NOTE: To install, apply muttjpurpose grcase
to th€ liftsr and slide stopper link.
1 1. Slide the anchor rod forward, then remove it from
the guide rail.
INNER CABLE
STOPPER
To install, inson tho anchor
rod by turning tho stopper 9Oo
AI{CHOR ROD
1 4 .
20-89
GUIDE RAIL
1 2 . Slide the guide rail backward, then remove th€ gude
rail from the inner cable.
NOTE: To install. apply the caulking ro gurde rarl
mount faces of the frame.
Apply caulking before
insta ing the guide rait.
Remove the screws, then remove the cable assem-
bly from the frame.
NOTE: Take care not to bend the cable pipes.
NOTE: lo install, fill the groove in
each grommet with sealant.
Installation is the reverse of the .emoval procedure.
NOTE:
a Damaged psrts should be replaced.
a Apply grease to the sliding portion.
1 3 .
FRAME