Acura 1994 Integra Service Manual page 403

Description
Power Flow (cont'd)
Ll Position
@ Position is provided to drive only 2nd speed.
1. Hydraulic pressure is applied to the 2nd clutch on the mainshatt and power is transmitted via the 2nd clutch to the
mainshaft 2nd gear.
2. Power transmitted to the mainshalt 2nd gear is conveyed via the countershaft 2nd gear, and drives the countersha{t.
3.
Power is transmitted to the final drive gear and drives the final driven gear.
NOTE:
Hydraulic pressure is also applied to the lst clutch, but since the rotation speed of the 2nd gear exceeds that of
1st gear, power from 1st gear is cut off at the one-way clutch.
TOROUE CONVERTER 2ND CLUTCH
MAINSHAFT
COUNTERSHAFT
FINAL DBIVE
2ND GEAR
FINAL DRIVEN GEAR
14-12