Acura 1994 Integra Service Manual page 73

1 .
Remove the cylinder head cover.
. Refer to page 6-31 when installing.
Remove the Dulley bolt and crankshaft pulley (see
page 6-8).
Remove the middle cover and the lower cover.
NOTE:
. Do not use the middle cover and lower cover for
storing items disassembled.
. Clean the middle cover and lower cover before
installation.
CAP NUT 6 x 1.0 mm
10. Loosen the adjusting bolt 180'.
1'1. Push the tensioner to remove tension from the tim-
ing belt, then retighten the bolt.
12. Remove the timing belt from the pulleys.
NOTE: Push the tensioner pulley to
loosen the belt.
8 .
9.8 N.m 11.0
7.2 rbl.ftl
WASHER
or
Replace when damaged
CYLINDEF HEAD
COVER
Reter to page 6-31 when
installing.
ADJUSTING BOLT
10 x 1.25 mm
54 N.m 15.5 kg{.m,
/r0 lbf.ftl
For adjustment only,
TIMING BELT
Adiustment, Page 6I
LOWEB @VER
MIDOLE COVER
6 x 1 . 0 m m
9.8 N.m 11.0 kgJ m, 7.2 lblftl
6 x 1 . 0 m m
9.8 N.m ('1.0 kgt.m,7.2 lbl fr)
Remove anY oiland clean
KE
6 x 1 . 0 m m
NMING BELT
GUIOE PLATE
lnstallwith concave
surface facing out.
and clean.
CRANKSHAFT PULLEY
Remove any oil
and clean on ihe
timing belt guide
plate sido.
9.8 N.m (1.0 kgtm,7.2lbt'ftl
6 - 1 1