1 . Remove the frame from the car {see page 2O-8O).
Remove the motor (see page 2O-8O).
Remove the drain channel.
NOTE: Take care not to damage, twist or lift the
seat.
V : Screw locations, 2
DRAIN
CHAI{NEL
4.
Remove the front drain
V : Clip locations, 2
channel on each side.
GUIDE RAIL
20-81
Glass Bracket/Slider, Lifter, Guide Rails and Cable Assembly Replacement
5. Remove the front rail holder on each side.
V : Nut, scrow locations
AV : f{ut, 2
b .
7 .
Remove the anchor spring on each side.
Remove the nuts and screws, then lift and remove
both guide rails and cable assembly from the trame.
Remove the sunshade and both sunshade rails.
BV: Screw,
BV : Sciow, 4
V : Nut, rcrow locations
AV : Nut. 2
NOTE: To instalt, Iill the
gtoove rn each grommet with sealant,
GUIDE RAIL
SUNSHADE