Acura 1994 Integra Service Manual page 640

Power Steering Hoses, Pipes
Replacement
NOTE:
. Connect each hosg to the corresponding pipe securg-
ly until it stops at the stopp€r on the pipe.
Install the clamp or ad,ustable clamp at the specified
distancs from the hose end as shown in the drawing.
. Add the power steering fluid to the specilied level on
the reservoir and check fo. leaks (see page 17-23).
<AIUUSTABII HOSE CLAMP:>
Put ov6r the pipe untilthe hose stops at the
$opper.
CAUTION: Chock all clampsfor doterioration 8nd dstor-
mation, and rsplacG with new onss if n6co33!ry,
<HOSE CLAMP:>
Put over the pipe untilthe
hose stops at the stopper.
2.5 - 5.5 mm
{0.01 - 0.22 inl
2.0 - 4.0 mm
10.08 - 0.16 inl
2.5 - 5.5 mm
10.01 - 0.22 in)
OUYI.fT HOSE
11 N.m
{1.1 kgl.m, 8 lbl.ftl
INI."ET HOSE
ABLE CLAMP
RETURN HOSE
coot"ER
CLAMPS
17 -34
CLAMPS