Acura 1994 Integra Service Manual page 962

lnterior Trim
Replacement lcont'dl
Sodan
Center pillar lower trim/Center pillal trim removal:
1. Remove the belt hole cap, then slip the front seat
belt through the slit in the belt hole cap.
<: Sc.ew location, 1
I
e)
)
2.
Remove the upper and lower anchor bolts trom the
tront seat belt, then remove the center pilla. lower
t i r m .
N O T E :
a When removing the anchor bolts, use a 17 mm
socket or box-end wrench.
a On reassembly, replace the upper anchor bolt (* )
and use liquid thread lock.
CENTER PILLAR
LOWER TRIM
FRONT SEAT BELT
BELT HOLE
CAP
*UPPER ANCHOR EOLT
7/t6-20 UNF
32 N m (3.3 kgf'm, 24 lbl ft)
A : Clip localions. 2
nfa147zzn
t r u i
L _ , )
ANCHOR COVER
FRONT
SEAT
EELT
CENTER PILLAR
LOWER TRIM
LOWER ANCHOR
BOLY
7/16-20 UNF
32 N.m 13.3 kgt.m,
24 lbt.ltl
ANCHOR CAP
20-94
v
3.
Remove the front and rear door trim
NOTE: When installing the ffont and rear door trim,
align them with the door opening flange notch.
4.
Remove the center pillar trim.
< : Cllp locations. 2
CENTER PILLAR
TRIM
lnstallation is the reverse oJ the removal procedure.
NOTE:
a lf necessary, replace any damaged clips.
a Belore attaching the center pillar lower trim and
belt hole cap. make sure there are no twists or
kinks in the front seat belt.