Acura 1994 Integra Service Manual page 123

Measure both the intake rocker shaft and exhaust rocker
shaft.
1. Measure diameter of shaft at first rocker location,
Arm-to-Shaft Clearance
2. Zero gauge to shaft diameter.
Surfaco should be smooth.
MICROMETER
Measure inside diameter of rocker
for out-of-round condition.
Rock6r A.m-iq.Shaft Clearance:
lntak. and Exhaust
Standald (Now): 0.025 - 0.052 mm
(0.0010 - 0.0020 in)
S.rvicc Limit: 0.08 mm {0.003 in}
arm and chgck
Inspect rocker arm
face tor wear.
Repest for all rockers.
-
lf over limit. replace rocker shaft and all over
tolerance rocker arms.
N O T E : l f a n y r o c k e r a r m n e e d s r e p l a c e m e n t ,
replace all three rocker arms in that set (primary,
mid, and secondary).
6,63