Acura 1994 Integra Service Manual page 92

1 4 .
1 6 .
Installthe timing belt {see page 6-12).
Adjust the valve clea.ance (see page 6-31.
Install the rubber seal in the groove of the cylinder
head cover. Seat the seal in the recesses for thg
camshaft first, th€n work it into the groove around
the outside edges,
NOTE:
.
B e f o r e i n s t a l l i n g t h e r u b b e r s e a l , t h o r o u g h l y
clean the seal and the groove.
. When installing, make sure the seal is seated
securely in the corners of the recass€s with no
gap.
CYUNDER HEAD
COVER
RUBAER SEAL
1 7 . Apply liquid gask€t to the rubber seal at the eight
corners of the recesses.
NOTE:
.
Use liquid gaskst, Part No. 08718 - 0001.
. Check that the mating surfaces are cl€an and dry
before applying liquid gasket.
. Do not install the parts if 20 minutes or mor6
h a v s e l a p s o d s i n c o a p p l y i n g l i q u i d g a s k e t .
Instead, reapply liquid gasket after removing old
reaidue.
. After assembly, wait at lsast 20 minutes before
filling the engine with oil.
Apply liquid g.sket to
the shaded areas.
(cont'd)
6 -31