Disassembly - Acura 1994 Integra Service Manual

Power Steering Pump
Disassembly (cont'dl
Flow Gontrol Valve Removal/lnspoction
l. Rsmove the control valve cov€r by romoving the
three flange bolts.
2. Remove the spring, flow control valve and O-rings.
FLOW
CONTROL VALVE
Check the flow control valvg for wgar, burrs, and
other damage to the edges of th€ groovos in tho
FLOW
OONTROL VALVE
Ch6ck for
damags to €dgos.
17-36
il.
Inspect the bore for the flow control valvs for scrat-
ches or wear.
5. Slip the valve back in the pump and chock that it
moves in and out smoothly.
-
lf OK, go on step 6, if not replace th6 valve and
rochsck the valve movsment.
NOTE: The original valve was selected for a precise
fit in the pump housing bore, so make sure ths n€w
on6 has the same identification mark.
Outsid€ Oiam€ter
-
lf the valve movement still incorr€ct, replaco the
pump as an assembly.
6. Attach a hose to the end of the valve as shown.
HOSE
Mark Part Name
Outside Diameter
m m ( i n )
A
FLOW CONTROL
VALVE A
17.991 - 17.996
(0.7083 - 0.7085)
FLOW CONTROL
VALVE B
17.996 - 18.001
{0.7085 - 0.7087}
FLOW CONTROL VALVE