Acura 1994 Integra Service Manual page 670

Steering Gearbox
Installation (cont'd)
10. Install the steering joint cover with the clamps and
cliDs.
STEERING JOINT COVER
11. Connect the fluid lines to the valve bodv unit.
CLIP
RETURN HOSE
17-64
38 N.m 13.9 kg{.m, 28 lbf.ft)
1 2 . I n s t a l l t h e r e a r b e a m b r a c e r o d a n d r e t u r n p i p e
clamp on the rear beam.
N O T E : I n s t a l l t h e r e a r b e a m b r a c e t o w a r d t h e
return pipe clamp.
13. Install the three way catalytic converter with the
new gaskets and new self-locking nuts, and connect
the heated oxygen sensor (H02S) connector,
HEATED OXYGEN SENSOR CONNECTOF
SELF.LOCKING NUT
33 N.m 13.4
SELF.LOCKING NUT
22 N.m (2.2 kgt m, 16 lbt.ftl
14. Connect the shift linkage (M/T model: see section
13, A/T model: see section 14).