Removal - Acura 1994 Integra Service Manual

Timing Belt
Removal
I
NOTE:
. Turn the crankshaft pulley so the No. 1 piston is at
top d6ad center (TDC) before removing the belt (see
page &12).
a Inspect the water pump when removed the timing
bolt {see page 10-9}.
1. Remove thawhe€lwell splash shield (see page 6-18).
2. Loosen ths adjusting bolt and mounting bolts, then
remove the power steering {P/S) pump belt.
MOUivNNG BOLTS
8 x 1.25 mm
2a N.m 12.4 kgf.m, 1 7 lbt frl
Loosen the adjusting bolt and idler pulley bracket
bolt, then remove the air conditioning (A,/C) com-
oressor belt.
IDLER PUI.IEY BRACKET
BOLT
l0 r 1.25 mm
a/a N.m {1.5 kgf.m.33 lbf'ft}
AA,USNNG
ADJUSTING
4,
Loosen the adjusting nut and mounting nut, then
remove the alt€rnator belt.
EELT
a,l N.m {4.5 kgl.m,33 lbfftl
Remove the cruise control actuator (see page 6-18).
Remove the sid6 sngine mount.
10 x 1.25 mm
52 N.m {5.3 kgr'm,38 lbtft}
R e p l a c e .
MOUNTING NUT
10 x 1.25 mm
ADJUSNNG NUT
8 x 1.25 mrr
2a N.m l2.a lef.m,
17 rbl.ftl
12 x 1.25 mm
74 N.m 17.5 kgt m,
s4 tb{.ftl