Acura 1994 Integra Service Manual page 404

In [Q! or l!31 position. the optimum gear is automatically selected from 1st, 2nd, 3rd and 4th speeds, according to con-
ditions such as the balance between throttle opening (engine load) and vehicle speed.
D! or lE.l Position, lst speed
1. Hydraulic pressure is applied to the lst clutch. which rotates together with the mainshaft, and the mainshaft lst
gear rorares.
2. Power is transmitted to the countershaft 1st gear, and drives the countershaft via the one-way clutch.
3. Power is transmitted to the final drive gear and drives the final driven gear.
N O T E :
In lDil or [Dl]l position, hydraulic pressure is not applied to the 1st-hold clutch.
TOROUE CONVERTER
1ST CLUTCH
MAINSHAFT
COUNTERSHAFT
(cont'd)
FINAL DRIVE GEAR
FINAL DRIVEN GEAR
14-13