Acura 1994 Integra Service Manual page 538

Clutch
Reassembly (cont'd)
7. Install the snap ring.
Remove the special tools.
Install the disc spring.
NOTE: Installthe disc spring in the direction shown.
SNAP RING
DISC SPRING
. \
):ll
14-148
1ST, 3RD, 4TH and
l ST.HOLD CLUTCH
1O. Soak the clutch discs thoroughly in ATF for a mini-
mum of 30 minutes.
11. Starting with a clutch plate, alrernately install the
clutch plates and discs. Install the clutch end plate
with flat side toward the disc.
NOTE: Before insralling the plates and discs, make
sure the inside of the clutch drum is free ot dirt or
other toreign matter.
CLUTCH END PLAT€
Install in this direction
1 2 . I n s t a l l t h e s n a p r i n g .
SNAP RING
SCREWDRIVER