Acura 1994 Integra Service Manual page 506

Valve Caps
Description
Caps with one projected tip and one flat end are in-
stalled with the llat end toward the inside ot the valve
body.
Caps with a projected tip on each end are installed
with the smaller tip toward the inside of the valve
body. The small tip is a spring guide.
Caps with hollow ends are installed with the hollow
end away from the inside of the valve body.
Caps with notched ends are installed with the notch
toward the inside of the valve body.
Caps with flat ends and a hole through the center are
installed with the smaller hole toward the inside of the
valve body.
Toward outside ot valv6 bodv. Toward outside oI valv€ bodv.
rq fq1 @.
lrj taj u
Toward inside of valve body. Towa.d inside of valve body.
Caps with one projected tip and hollow end are in-
stalled with the tip toward the inside of the valve body.
T h e t i p i s a s p r i n g g u i d e .
Caps with llat ends and a groove around the cap are
installed with the grooved side toward the outside of
the valve body.
Towa.d outside ot valve body.
Toward outside of valve bodv.
Toward inside of valve body.
Sectional view
Toward inside of valve body.
14-11 6