Rocker Arms - Acura 1994 Integra Service Manual

VTEC
Rocker Arms
nlrungf rtrrrri'
-
rYrorrtrcr rrrDPEUtrl,rl
1. Set rh6 No. I Diston at TDC.
2.
Remove the ignition wire cover and the wires.
3.
Remove the ignition clamps while pulling up on the
lock.
4.
Remove the cylinder head cover.
Push the mid rocker arm on the No. 1 cylinder man-
ually.
Check that the mid rocker arm moves independent-
ly of the primary and secondary rocker arms.
6 x 1.0.nm
9.8 N.m 11.0 lgfm, 7.2 lbf.ftl
SECONDARY
ROCKER ARM
7.
Check the mid rocker arm of each cvlinder at TDC.
. lf the mid rocker arm does not move, remove the
mid, primary and secondary rocker arms as an
assembly and check that the pistons in the mid
and primary rocker arms move smoothly.
. lf any rocker arm needs replacing, replace the
primary, mid, and secondary rocker arms as an
assemblv.
NOTE: Refer to page 6-78 when installing cylinder head
cover.
w