Acura 1994 Integra Service Manual page 536

Clutch
Reassembly
NOTE:
a Clean all psrts thoroughly in solvent or carburetor
cleaner. and dry them with compressed air.
a Blow out all passages.
a Lubricate all pans with ATF before .eassembly.
1. Inspect the check valve; if it's loose, replace the
prston,
NOTE: Except 1st-hold clutch.
CHECK VAIVE
PISTON
14-146
3, Installthe piston in the clutch drum. Apply pressure
and rotate to ensure proper seating.
NOTE: Lubricate the piston O-ring with ATF before
installing,
CAUTION: Do not pinch rh6 O-ring by installing th€
piston with too much lorco.
CLUTCH DRUM
Installthe return spring and spring retainer. and po-
sition the snap ring on the retainer
4 .
SNAP RING
SPRING RETAINER
RETURN SPRING
CLUTCH ORUM