Acura 1994 Integra Service Manual page 648

Power Steering Pump
Reassembly (cont'dl
Set the pump cam ring over the two rollers with the
"8" mark on the cam ring upward.
Apply clean power steering fluid to the vanes and
cam ring.
Install the 68.5 x 1,9 mm O-ring on the pump cover.
Align the roller set holes in the pump cover with the
rollers.
'16. Align
the projection on the pump housing and the
projection on the pump cover, and tighten the four
bolts.
20 N.m
{2.0 kg .m, lil lbf.ftl
PUMP COVER
PROJECTIONS
1 3 .
PUMP CAM RING
1 4 .
1 5 .
17 -42
1 7 .
1 8 .
1 3 x 1 . 9
O.RING
E
Set the 13 x 1.9 mm O-ring on the inlet joint.
Install the inlet joint on the pump housing.
11.1 kgt.m. t lbf.ftl
INLET JOINT
T9