Acura 1994 Integra Service Manual page 980

8. lnstallation is the reverse ot the removal procedure
N O T E :
a Make sure the seat-back locks securely.
a It necessary, adiust the rear seal latch and
seat-back.
a BeJore sttaching the seat-back, side bolsters and
seat cushion, make sure there are no twlsts or
kinks in the rear seat belts and center belt
a When installing the seat cushion, slip the seat belt
buckles through the slits in the seat cushion.
1 .
2 .
SEAT-BACK
Seats
Rear Seat Replacement (cont'd)
Rear Seat Cover RePlacement
CAUTION: Wear glov€s to l€movo and install tho seat
covgls.
NOTE:
a Take care not to tear the seams or damage the seat
covels,
a Remove the cliDs as shown.
Soat-back cover romoval:
Hatchback
Remove the seat-back (see page 20-108).
Remove the latch cover and latch collar (see page
2 0 - 1 0 9 ) .
Remove allthe clips trom the back of the seat-back,
then loosen the seat-back cover.
SEAT.BACK
COVER
4 . Pull back the edge of the seat-back cover all the way
around, then release the clips.
ilg
E
F]
CLIP
SEAT-BACK
CLIP
20-112