Acura 1994 Integra Service Manual page 405

Description
Power Flow (cont'd)
JD.l or lD"l Position, 2nd speed
1. Hydraulic pressure is applied to the 2nd clutch, which rotates together with the mainshaft, and the mainshatt 2nd
gear rotates.
2.
Power is transmitted to the countershaft 2nd gear, and drives the countershaft.
3.
Power is transmitted to the tinal drive gear and drives the final driven gear.
N O T E :
In @ or @ position, 2nd speed, hydraulic pressure is also applied to the lst clutch. but since the rotation speed
of 2nd gear exceeds that of 1st gear. power trom lst gear is cut off at the one-way clutch.
TOROUE CONVERTER
MAINSHAFT
COUNTERSHAFT
FINAL DRIVE GEAR
2ND CLUTCH
FINAL DRIVEN GEAR
14-14