Acura 1994 Integra Service Manual page 937

7 . With a helper on the outside, pullthe piano wire back
and torth in a sawing motion, and carelully cut
through the adhesive around the entire rear window.
CAUTION: Hold tho piano wir€ as closo to the real
window as possible to prevent damage to the body.
REAR WINDOW
PIANO wlRE
8. Carefully remove the rear window.
Installation
Scrape the old adhesive smooth with a knite, to a
thickness of about 2 mm (O.08 in) on the bonding
surface around the entire rear window opening
flange.
a Do not scrape down to the painted sudace of the
body; damaged paint will interfere with proper
bonding.
a Remove the upper and lower fasteners trom the
body.
a Mask off surrounding surfaces before applying
Dflmer.
2.
Clean the body bonding surface with a sponge damp-
ened in alcohol.
NOTE: After cleaning, keep oil, grease and water
from getting on the surface.
3. ll the old rear window is to be reinstalled, use a Dut-
ty knife to scrape oft all traces of old adhesive. then
clean the rear window surface with alcohol where
new adhesive is to be aDolied.
NOTE: Make sure the bonding surface is kept free
of water, oil and grease.
CAUTION: Avoid setting the rear window on its
edges; small chips may later develop into cracks.
Clean the shadowed area.
{cont'd)
/s
\\--
t \
20-69