Acura 1994 Integra Service Manual page 401

Description
Power Flow lcont'dl
Lll Position Acceloration
In f
position, hydraulic pressure is applied to the lst clutch and lst-hold clutch.
The power flow when accelerating is as tollows:
1. Hydraulic pressure is applied to the 1st clutch on the mainshalt and power is transmitted via the lst clutch to the
mainshaft 1st gear.
2. Hydraulic pressure is also applied to the 1st-hold clutch on the sub-shatt. Power transmitted to the mainshaft 1sl
gear is conveyed via the countershaft 1st gear to the one-way clutch. and via the sub-shaft 1 st gear to the l st-hold
clutch. The one-way clutch is used to drive the countershaft. and the 1st-hold clutch drives the countershaft via
the 4th gears.
3. Power is transmitted to the finai drive gear and drives the final d.iven gear,
SUB-SHAFT 4TH GEAR
SUB-SHAFT
lST-HOLD CLUTCH
MAINSHAFT 1ST GEAR
1ST CLUTCH
COUNTERSHAFT
ONE-WAY CLUTCH
PARKING GEAR
,I ST GEAR
SUB.SHAFT 'IST GEAR
FINAL DRIVEN GEAR
14-10