Alignment; Piston Pins; Removal - Acura 1994 Integra Service Manual

Piston Rings
Alignment
1 .
Installthe rings as shown.
ldentify top and second rings by the chamfer on the
edge. Make sure they are in their proper grooves on
the prston.
NOTE: The manufacturing marks must be facing
upwaro.
TOP BING
OIL RING
SPACER
3.
Position the ring end gaps as shown:
DO NOT position any ring gap
sEcoNo R|NG GAp
-.- :':
:.-"' :
- '
'
----'--
{
_- - -
at prston thrust surfaces.
App.ox. 90"
OIL RING
ls" GAP
TOP BING GAP
SPACER GAP
Rotate the rings
do not bind.
DO NOT position any ring gap
in line with the piston pin hole.
SECOND RING
in their grooves to make sure they
MARK
OIL RING GAP
Piston Pins
Removal
1. Assemble the Piston Pin Tools as shown.
PISTO]T PIN BASE INSEN|T
--r otGAF- PH6{t1,0
PISTON BASE HEAD
--l
PISTON BASE SP '{G
07973 - 65r06{X'
7 -18 ,