Acura 1994 Integra Service Manual page 641

OUTI.TT HOSE
Power Steering Pump
Removal
NOTE: Before disconnecting the hoses from the pump,
place a suitable containsr under the car.
1.
Drain the power steering fluid from the rsservoir.
2.
Remove the belt by loosening the pump adjusting
bolt and mounting bolts.
3 .
D i s c o n n e c t t h e i n l e t a n d o u t l e t h o s e s f r o m t h e
pump and plug the hoses.
NOTE; Take care not to spill ths tluid on the body
or parts. Wipe off spillod fluid at once.
4.
Remove the pump mounting bolt, then remove th€
p u m p
N O T E : D o n o t t u r n t h e s t e e r i n g w h e s l w i t h t h e
pump removeo
5.
Wrap the opening of th€ pump with a piece of taps
to provent any foreign mat€rial. Se6 pags 17-44 for
oumD instsllstion,
tNt.€T HOSE
Disassembly
Pulley Removal
1. Drain the fluid from the pump.
2,
Hold the stee.ing pump in a vise with soft iaws, and
hold the pulley with the specialtool and remove the
pulley nut and pulley.
CAUTION: Bo clrstul not to damage the pump
ho$ing with thr iaw3 of ths vise.
NOTE: Pullev nut has left-hand threads.
PULLEY NUT {Left-hand thread)
(cont'dl
17-35