Differential (81 881 engine)
Side Clearance Adjustment
l.
Install the diflerential assembly, making sure it bot-
toms in the clutch housing. using the specialtoolas
shown.
2.
Install the 80 mm shim.
NOTE: Instsll the 80 mm shim that was removed.
mm SHIM
HOUSING
1 5 - 6
?
Install the transmission housing (see section 13).
NOTE: Do not apply liquid gasket to the mating sur-
,ace ot the clutch housing.
Tighten the transmission housing attaching bolts
(see section 13).
8 x 1 . 2 5 m m
27 N.m 12.8 kgf'm, 20 lbf.ftl
Use the special tool to bonom the differential assem-
bly in rhe clutch housing.
Measure clearance between the 80 mm shim and
bearing outer race in the transmission housing.
4 .
t t .