FIP1.45 Full Stack Error/500 Paper Exit
Step
Possible causative parts:
SENSOR FULL STACK (PL10.1.26)
ACTUATOR FULL STACK (PL10.1.10)
HVPS/MCU (PL12.1.19)
Checking ACTUATOR FULL STACK for operation
1
Does ACTUATOR FULL STACK in paper feed out section
move smoothly?
Checking SENSOR FULL STACK for operation (1)
Remove EP CARTRIDGE.
Does the number of Sensor/Switch Check increase by
2
one, every time pushing and releasing ACTUATOR FULL
STACK?
Checks by Chapter 2 Diagnostic [Sensor/Switch Check].
Checking SENSOR FULL STACK for operation (2)
Replace SENSOR FULL STACK.
3
Does the problem still occur, after replacing SENSOR
FULL STACK?
Check
1 - 52
Chapter 1 Troubleshooting
Yes
With tool
Go to step 2.
ACTUATOR
Without tool
FULL STACK.
Go to step3.
Go to FIP2.46
Go to step 3.
SENSOR FULL
Replace
HVPS/MCU.
End of work
(RRP12.10)
No
Replace
STACK.