Removal
1)
Remove the COVER REAR 500/COVER REAR 250 (PL10.2.21/PL9.1.12). (RRP10.9/9.4)
2)
Remove the COVER REAR (PL1.1.3). (RRP1.1)
3)
Remove the FAN MAIN (PL12.1.10). (RRP12.6)
4)
Release the hooks securing the COVER SENSOR (PL5.1.29), and remove the COVER SENSOR
from the CHUTE ASSY REGI.
5)
Release the hooks securing the SENSOR REGI, and remove the SENSOR REGI from the COVER
SENSOR.
6)
Disconnect the connector (P/J241) of the HARNESS ASSY TRAY 1 (PL5.1.37) from the SENSOR
REGI.
Replacement
1)
Connect the connector (P/J241) of the HARNESS ASSY TRAY 1 (PL5.1.37) to the SENSOR
REGI.
2)
Install the SENSOR REGI to the COVER SENSOR (PL5.1.29), and secure it using hooks.
3)
Install the COVER SENSOR to the CHUTE ASSY REGI, and secure it using hooks.
4)
Install the FAN MAIN (PL12.1.10). (RRP12.6)
5)
Install the COVER REAR (PL1.1.3). (RRP1.1)
There are 2 kinds of screws, make sure they are put in the right place.
6)
Install the COVER REAR 500/COVER REAR 250 (PL10.2.21/PL9.1.12). (RRP10.9/9.4)
Chapter 3 Removal and Replacement Procedures (RRPs)
3 – 138