6)
Install the GEAR PB R (PL3.1.20) to the SHAFT PB (PL3.1.9), and secure it with the hook.
Be sure to install the hook of the GEAR PB R into the groove of the SHAFT PB.
7)
Install the PLATE GEAR LOCK 250 (PL3.1.19) to the HOUSING BASE 250, and secure it with the
hook.
8)
Secure the PLATE GEAR LOCK 250 using the screw (gold tapping, 8mm).
9)
Push the PLATE ASSY BTM (PL3.1.10) downward to lock.
Chapter 3 Removal and Replacement Procedures (RRPs)
3 – 78