Oki B6200 Maintenance Manual page 29

Chain Link Fault Items
Unable to spool TIFF
016 716
Data
016 721 Other Error
016 726 PDL Auto Switch Fail
016 728 Unsupported TIFF Data
016 729 TIFF Data Size is too Big
Unsupported ART
016 730
Command
016 731 Invalid TIFF Data
Data is not printed when
the specified form is not
016 732 registered in the <form
composition error>
emulation.
Unsupported function is
016 744
include in the sent PDF
When accessing the
personal box, detect
016 748
FULL status and end the
job
Detect <JCL/PJL syntax
016 749 error> the syntax of JCL/
PJL command error
016 751 PDF Error
016 752 PDF Short of Memory
PDF Password
016 753
Mismatched
Conditions of detect/Methods of treatment
Cannot spool TIFF file due to lack of memory.
If HDD is not installed, install it.
If it is installed, add the capacity.
Unexpected error is caused when printing.
Causes maybe as follows.
1. It is printed by auto tray selection while [Paper priority] is set to [no
setting] for all paper types in the common menu [Printing settings].
2.ESC/P command errorCheck printing data
Printing language cannot be selected automatically when printing
mode is set to [Auto].
Causes maybe as follows.
1. PostScript Data is sent without installing PostScript software.Install
PostScript software kit.
2. PDF file is directly sent to the machine by using LPR while the
internal HDD is not installed though PostScript software is installed.
Install intertnal HDD.
3. Data of ART Ⅳ , 201H, ESC/P, HP-GL, or HP-GL/2 is sent with the
printing mode [Auto] when ART Ⅳ /Emulation kit is not installed. Install
ART Ⅳ / Emulation kit. (HP-GL and HP-GL/2 can be used by
PostScript software kit.)
Unsupported tags are included in TIFF file.
Check printing data.
Color standards and resolution of TIFF data are specified over the
valid range.
Change Color standards and resolution of TIFF file, and print out
again.
A command which is not supported by ART is detected.
Check the printing data, delete the command to cause error, and
indicate printing.
TIFF data is not sufficient.
Check the printing data, and indicate printing.
Decomposer detects that the specified form is not registered.
Resend the form data.
When using PDF1.3, Transparency or JBIG2 is included in PDF file.
Print out through a driver by using Acrobat Reader.
When accessing HD, detect FULL status and end the job.
Make capacity of HD, and print again.
Detect syntax error of JCL/PJL command.
Correct the command.
When processing PDF Bridge, errors such as syntax error, usage of
undefined command, parameter error, breakage of PDF file, or internal
error of PDF decomposer are caused.
Open PDF file by using Adobe Acrobat Reader, and execute printing
from [Print] under [File].
While processing PDF Bridge, detect lack of memory.
If the Contents bridge is used, change the setting of [Print mode] in the
[Contents Bridge] dialog box.
If [High quality] is selected, change to [Normal].
If [Normal speed] is selected, change to [High speed].
When processing PDF files protected by password, the password for
UI panel setting and the password specified by XPJL (set by Contents
Bridge Utility) are not identified.
Set the correct password by a printer or Contents Bridge Utility, and
execute printing again.
1 - 13
Chapter 1 Troubleshooting
Ref FIP
-
-
-
-
-
-
-
-
-
-
-
-
-
-