Power Source - Oki B6200 Maintenance Manual

4. Safety
To prevent possible accidents during maintenance operation, you should observe the "Warning" and
"Caution" information in this manual.
Dangerous operations and operations out of range of this manual should be absolutely avoided.
Various processes not covered by this manual may be required in actual operation, which should be
performed carefully always giving attention to safety.

4.1 Power source

Keep the power supply off during maintenance operation to prevent electric shock, burns and other
damages. Keep the power plug disconnected during the maintenance operation.
If the power supply should be kept connected for measurement of voltage or other similar reasons,
sufficient care should be given to prevent electric shock, by following the procedures of this manual.
While the printer is ON, never touch live parts if not absolutely required .
Power is supplied to the power switch / inlet (LVPS ASSY) even while the printer is
off. Never touch its live components.
Do not touch live parts unless otherwise specified.
(34PPM)
iii
G0101AA
(24PPM)
G0001AA