Oki B6200 Maintenance Manual page 375

24PPM
Removal
1) Remove the COVER REAR 250 (PL9.1.12). (RRP9.4)
2) Remove the COVER REAR (PL1.1.3). (RRP1.1)
3) Remove the COVER LEFT (PL1.1.6). (RRP1.3)
4) Remove the COVER RIGHT (PL1.1.4). (RRP1.2)
5) Remove the CHUTE ASSY EXIT 250 (Reference Only) (PL9.1.14). (RRP9.7)
6) Remove the CHUTE LW EXT2 ASSY (PL9.1.2). (RRP9.1)
7) Remove the COVER TOP (PL1.1.7). (RRP1.4)
8) Remove the COVER FRONT (PL1.1.5). (RRP1.5)
9) Remove the DUCT FRONT (PL8.1.4). (RRP8.2)
10) Remove the FUSER ASSY (PL8.1.20). (RRP8.8)
11) Remove the ROS ASSY (PL8.1.1). (RRP8.1)
Never give any impact to the ROS ASSY with a screwdriver or other tools.
12) Remove the 2 screws (black with flange, 8mm) securing the SHIELD PLATE ROS to the frame.
13) Move the SHIELD PLATE ROS in the direction of the arrows to remove.
Replacement
1) Install the SHIELD PLATE ROS by moving it in the opposite direction of the arrows.
2) Secure the SHIELD PLATE ROS using the 2 screws (black with flange, 8mm) to the flame.
3) Install the ROS ASSY (PL8.1.1). (RRP8.1)
Never give any impact to the ROS ASSY with a screwdriver or other tools.
4) Install the FUSER ASSY (PL8.1.20). (RRP8.8)
5) Install the DUCT FRONT (PL8.1.4). (RRP8.2)
6) Install the COVER FRONT (PL1.1.5). (RRP1.5)
7) Install the COVER TOP (PL1.1.7). (RRP1.4)
8) Install the CHUTE LW EXT2 ASSY (PL9.1.2). (RRP9.1)
9) Install the CHUTE ASSY EXIT 250 (Reference Only) (PL9.1.14). (RRP9.7)
10) Install the COVER RIGHT (PL1.1.4). (RRP1.2)
11) Install the COVER LEFT (PL1.1.6). (RRP1.3)
12) Install the COVER REAR (PL1.1.3). (RRP1.1)
There are 2 kinds of screws, make sure they are put in the right place.
13) Install the COVER REAR 250 (PL9.1.12). (RRP9.4)
Chapter 3 Removal and Replacement Procedures (RRPs)
3 – 211