Removal
1)
Remove the COVER REAR 250 (PL9.1.12). (RRP9.4)
2)
Remove the COVER REAR (PL1.1.3). (RRP1.1)
3)
Remove the COVER LEFT (PL1.1.6). (RRP1.3)
4)
Remove the CHUTE ASSY EXIT 250 (Reference Only) (PL9.1.14). (RRP9.7)
5)
Remove the CHUTE LW EXT2 ASSY (PL9.1.2). (RRP9.1)
6)
Remove the 2 screws (silver, 6mm) securing the MOTOR ASSY EXIT to the BRACKET MOTOR
(PL9.1.10) assembled into the CHUTE LOWER EXIT 250 (PL9.1.5).
7)
Move the MOTOR ASSY EXIT in the direction of the arrows (A) and (B) to remove.
Replacement
1)
Move the MOTOR ASSY EXIT in the opposite direction of the arrows (A) and (B) to install.
2)
Secure the MOTOR ASSY EXIT to the BRACKET MOTOR (PL9.1.10) using the 2 screws (silver,
6mm).
3)
Install the CHUTE LW EXT2 ASSY (PL9.1.2). (RRP9.1)
4)
Install the CHUTE ASSY EXIT 250 (Reference Only) (PL9.1.14). (RRP9.7)
5)
Install the COVER LEFT (PL1.1.6). (RRP1.3)
6)
Install the COVER REAR (PL1.1.3). (RRP1.1)
There are 2 kinds of screws, make sure they are put in the right place.
7)
Install the COVER REAR 250 (PL9.1.12). (RRP9.4)
Chapter 3 Removal and Replacement Procedures (RRPs)
3 – 263