Removal
1)
Open the COVER OPEN (PL1.1.2).
2)
Release the hook securing the ROLL ASSY NUDGER, and pull the ROLL ASSY NUDGER out
from the SHAFT NUDGER (PL5.1.9).
3)
Release the hook securing the ROLL ASSY FEED, and pull the ROLL ASSY FEED out from the
SHAFT FEED (PL5.1.41).
When removing, do not hold the rubber rollers of the ROLL ASSY NUDGER and
ROLL ASSY FEED.
Replacement
The ROLL ASSY FEED and ROLL ASSY NUDGER are the same parts, althrough the
names differ.
1)
Install the ROLL ASSY FEED to the SHFT FEED (PL5.1.41), and secure the ROLL ASSY FEED
with the hook.
Be sure to install the hook of the ROLL ASSY FEED into the groove of the SHAFT
FEED.
2)
Install the ROLL ASSY NUDGER to the SHFT NUDGER (PL5.1.9), and secure the ROLL ASSY
NUDGER with the hook.
Be sure to install the hook of the ROLL ASSY NUDGER into the groove of the
SHAFT NUDGER.
3)
Close the COVER OPEN (PL1.1.2).
Chapter 3 Removal and Replacement Procedures (RRPs)
3 – 122