Chapter 3 Removal and Replacement Procedures (RRPs)
10) Install the COVER TOP (PL1.1.7). (RRP1.4)
11) Install the 500 EXIT ASST (PL10.1.2). (RRP10.2)
12) Install the COVER EXIT 500 (PL10.1.1). (RRP10.1)
13) Install the COVER RIGHT (PL1.1.4). (RRP1.2)
14) Install the COVER LEFT (PL1.1.6). (RRP1.3)
15) Install the FUSER ASSY (PL8.1.20). (RRP8.8)
16) Install the COVER REAR (PL1.1.3). (RRP1.1)
There are 2 kinds of screws, make sure they are put in the right place.
17) Install the COVER REAR 500 (PL10.2.21). (RRP10.9)
18) Install the BTR ASSY (PL8.1.21). (RRP8.10)
3 – 232