Oki B6200 Maintenance Manual page 30

Chain Link Fault Items
016 754 PDF LZW Not Installed
016 755 PDF Print Prohibited
016 760 PS Decompose Error
016 761 FIFO Empty ERR
Specified Decomposer
016 762
Not Exist
Email Not Printed due to
016 796
User Settings
Invalid Output Destination
016 797
for Email Received
016 798 No TrustMarking Option
Print Instruction Fail
016 799
detected in PLW
016 982 -
103 203 Machine Code Fail
103 204 Serial No. Fail
All Machine Codes
103 207
Mismatch
Conditions of detect/Methods of treatment
Without installing "Contents Bridge Extension kit", the PDF file
which is LZW compressed is processed by using PDF Bridge.
Open PDF file by using Adobe Acrobat Reader, and execute printing
from [Print] under [File].
Install Contents Bridge Extension kit.
Print the PDF file which is specified not to print. Release the setting not
to print the PDF file by using Adobe Acrobat, and execute printing
again.
When decomposing Post Script, an error is caused. Set [Print mode] to
[High quality]. When it is not recovered yet, set to [Normal].Add print
page buffer.Add PS use memory.
Image extension error is caused. (FIFO Empty error)
Set [Print mode] to [High quality, and execute printing again.
When it is not recovered yet, set [page print mode] to [Yes].
Unimplemented functions (printing language, printing utility, and so on)
are required.
The printer can print ART EX, ART Ⅳ , 201H, ESC/P, HP-GL, HPGL/2,
TIFF, and PDF data as standard.
If sending PostScript is expected, please install the optional PostScript
software kit.
When printing attached files only at receiving e-mail is set, the e-mail
without attachment files is deleted.
When printing the message of the e-mail and e-mail header is
expected, change the setting on the property screen of CentreWare
Internet Services.
The address of the e-mail sent to this machine by using E-mail print
faction is not correct.
Specify the correct address, and resend the e-mail.
No HD error is returned when calling S-Image lib by Decomposer.
Install the required Option(HD).
The combination of print parameters is not correct.
[Tray paper size] of trays 1-4 are set to [Auto] on the operation panel,
[Paper tray select] is set to [Auto], and print out in infinite form.
Check the printing indication.
When accessing HDD, detect Full status.
Detect the error that Full is not released even though it is waited for
while. (No page can be stored.)
After execute or delete the job (documents) in the same HDD partition,
execute the operation again.
Machine Code is not set when shipping from the factory.
After the shipment, the data of Machine Code, or MCU PWB and ESS
PWB are replaced incorrectly.
Execute DC132 Serial No matching.
When it is not recovered yet, Replace ESS PWB or MCU PWB in
order. (Replacing both of them simultaneously is impossible.)
Serial No. is not set when shipping from the factory.
After the shipment, the data of Serial No., or MCU PWB and ESS PWB
are replaced incorrectly.
Execute DC132 Serial No matching.
When it is not recovered yet, Replace ESS PWB or MCU PWB in
order. (Replacing both of them simultaneously is impossible.)
At least one of Product Codes which are maintained in three points are
wrong value.
Execute DC132 Serial No matching.
When it is not recovered yet, Replace ESS PWB or MCU PWB in
order. (Replacing both of them simultaneously is impossible.)
1 - 14
Chapter 1 Troubleshooting
Ref FIP
-
-
-
-
-
-
-
-
-